Expert Answers about Keystone Avalanche Fifth Wheel

• Reese Goose Box Pin Box Replacement for Keystone Avalanche 5th Wheel Trailer
• The Reese Goose Box Pin Box replacement will not void the manufacturer's warranty. The Goose Box is an air ride box to absorb shock as well as reduce jarring and chucking. We have a few different options, however the Lippert number you gave is not a pin box number. That is not a problem because we do have measurements that can be taken to assist in determining that pin box replacement. I've attached an article to assist with this. We have the # RP85FR which is a confirmed fit for...
  view full answer...


• Locating Replacement Hubs and Brake Assemblies for 2014 Keystone Cougar Trailer
• We have everything you need to replace the hub and brake assembly on your Keystone Cougar Trailer, but unfortunately trailer manufacturers do not keep an accurate or readily available record of the smaller parts that they install on trailers. Because of this, the best method for determining which hub will fit your trailer is to simply pull the hub and check for the bearing numbers that are used. The numbers should be stamped right onto the bearings themselves. If you cannot locate this...
  view full answer...


• Need Backup Solenoid For Hydraulic Leveling And Slide-Outs For 2017 Keystone Avalanche 5th Wheel
• I fully understand wanting a backup unit! Based on your information, I recommend the Lippert Components Polarity Reversing Solenoid by Trombetta for Hydraulic Power, Item # LC118246. This polarity reversing solenoid is a cost effective and simple solution to keep everything working for you on your trips.
  view full answer...


• How To Find the Correct Landing Gear Legs for a 2012 Keystone Avalanche
• In order to find the correct replacement landing gear legs for a fifth wheel trailer I would need you to take two quick measurements of your existing landing gear legs, the outer tube length and weld stop spacing. I have attached a photo to assist. The most common replacement landing gear legs are the Replacement 5th Wheel RV Landing Gear Legs part # LC179013 for lead and part # LC179014 for follow. These measure 29-1/2" on the outer tube and 15-1/2" between the weld stops (inside to inside).
  view full answer...